Ducati 998s FE Final Edition (REPLICA but MODIFIED FAR BEYOND the Original) Build Thread

[BMW Alpina]

Now it is time to TEST to make sure these "MOTORSPORT Grade" wires work by first connecting all 3 wires (Ground, Indicator and Turn Signal) :


And yes, they worked:
First, both left and right INDICATOR Lights (White LED):


Then test the Left and Right turn signal, and again worked:


Now I need to add the Rizoma Adapter to install these Rizoma Corsa indicator / turn signal combo onto the MS Production Corse (larger size) Intakes, with Titanium ProTi bolt of course:


Done:


But wait, I forgot,... I need to install the Rizoma Corsa onto the Rizoma Adaptor first before installing the Rizoma Adaptor onto the MS Production Carbon Intake.
Use the ProTi Titanium Nuts of course:




Installed:


Run the wiring inside the MS Production Intake:


Out to the other side of the MS Production Carbon Fiber Air Intake ready to be connected to the supply wire harness:

 

[BMW Alpina]

Now time to pay attention back to the Speedometer. First, I found this new but old stock real Ducati Carbon Fiber speedometer surrounds (to someday replace the foam):


Test fit them, but I still need to refinished them in Matte Clear, so it will become DRY CARBON looks:


First problem, the Neutral Light Indicator is NOT bright enough, so I am replacing with brighter LED:





Before and After

 

[BMW Alpina]

Oh, talking about light, I bought this dual-function tail light and brake light. Soon I will post why:



I also purchased these custom Y-Splitter SuperSeal connectors from a vendor in Italy to be use with the 2 lights above... I think you might already know where I am going with this: