Streetfighter build.
- Thread starter Monsta
- Start date
Welcome to the forum @Monsta , please keep us updated with your Streetfighter Build
Here are the carbon parts that were installed.I will definitely post some more. I’ve completed a lot of the work already. I’ll be posting on the Diavel build threads also. I foolishly began building my Streetfighter before the Diavel was done.
I noticed you sourced from both FullSix and Ilmberger. Are their matte color quite similar or slightly different? If different, what is the difference? Thanks
They are the same as far as satin finish and weave go I cannot comment on matte or gloss I only have satin parts which is what Ducati uses. Ilmberger is better built I think because they use a coating on the inside of the part though may be a bit heavier. Also some of ilmberger parts have a unique design not just copied from stock part. The headlight spoiler from ilmberger is larger and looks more aggressive.
Attachments
I received damaged fork lowers from motocorse yesterday. Black stuff all over the lowers and the front fender attachments were all beat up and had machining errors. IDK if the black spots would polish out or not. But I think for 1300 for the set I shouldn’t have to polish anything.
Workin with the vendor to get a return and replacement, it’s odd because anything I’ve gotten from motocorse in the past has been flawless. Motocorse sent me incorrect parts last month and made it right within a week so I think my current situation should be made right without any fuss. The photos aren’t the best quality but I assure you black spots are there
Workin with the vendor to get a return and replacement, it’s odd because anything I’ve gotten from motocorse in the past has been flawless. Motocorse sent me incorrect parts last month and made it right within a week so I think my current situation should be made right without any fuss. The photos aren’t the best quality but I assure you black spots are there
Forgot to add that is an integrated taillight with turn signals and brake lights. These are available for the panigale as well. I’d recommend the clear for visibility and safety sake. One of the vendors actually comes with plugs that work for Ducati already soldered V4evo maybe? I got the werkes that claimed plug and play. It was not I had to cut solder the plugs.
I am actually selling mine in Red Anodized color 
: Motocorse "SBK style" Ohlins forks caliper mounts for Ducati Panigale V4S and Ducati Streetfighter V4S in Red Anodized color. Motocorse Part#102130145
: Motocorse "SBK style" Ohlins forks caliper mounts for Ducati Panigale V4S and Ducati Streetfighter V4S in Red Anodized color. Motocorse Part#102130145Those are very nice. I’m getting the silver ones returned and they will send another set.I am actually selling mine in Red Anodized color
Almost time time to let the animals out of the Zoo. I installed a Motocorse titanium kickstand bolt and the Motocorse quick shift linkage.
I’ve begun the Proti process on some of the bolts for my bike. So far oil pan and the both engine cases. Also workin on a OG Streetfighter my son bought. The V4 is currently in the shop on a Superlite sprocket holder warranty this bike ate that part in under 1000 miles. I just received a bunch of other parts I’ll upload pics later. 
bp_SFV4
Active member
I have a bunch of matte CF stuff from Motocomposites (not recommended) and Fullsix (highly recommended). Both have less gloss than matte Ilmberger, which is more of a satin. Ducati calls the Ilmberger stuff they sell matte, but it is for sure satin. I re-clearcoated by Akra carbon fiber exhaust parts and DP heel guards with a 2K matte clear so it all matches.