1198S "just for fun" track build

[The_rusty_racer]

I've owned a bunch of bikes, and I’ve been club racing, mostly Suzukis, and now an RSV4. I've just gotten my hands on my very first Duc, an 1198S. The plan is to build it into a track bike for coaching and track days as a “B bike” in case I’m unable to race the RSV4 for whatever reason. So the main goal is to make it fun and cool, while complying with the requirements of my local racing organizations.

A close friend of mine works at the local Ducati dealer, so we’ll be building the bike there after hours. This project wouldn’t have started without him and is probably even more his baby than mine. He recently did a frame-up build of a killer 848 evo, so this project is right up his alley. I’ll be using a lot of his expertise on the platform, and he’ll be riding it too.

One of the cool things about having someone working at the dealer is that a couple of the long-time guys at the shop recognized it. Apparently, the original owner was a bit of a character, and for him, money was no object. We checked the VIN and service history, and it was crashed on the left in 2010, then fully repaired to OEM level. It still has lots of evidence of a left-hand low side, so I guess it got crashed again semi-recently?

As we got it, the 1198 was a write off and besides the low side, it appears to have been left outside for at least a year, probably more. There’s soooooooo much rust. So the first order of business was to strip the bike down, get it cleaned up, and diagnose exactly what’s wrong with it.

Here is the bike without the crashed fairings and after a quick wash


The good news ia the bike already has the 70mm termis on it and the race ECU. The forks are in shockingly good condition, and there doesn’t seem to be any scratches or rock chips on them. So a perfect track base. Because it’s got the factory Öhlins, I don’t feel the need for an upgrade. I plan to just refresh the forks and shock, and maybe do springs for my weight. One thing that will absolutely need to be addressed is brakes. Our local track is incredibly punishing on brakes, so we will probably do a new master cylinder and possibly a bit more depending on budget. For now the first stage will leave engine performance alone and just focus on reliability, ergonomics and crash protection.

...and what's a garage hangout witour pizza and beer

 

[The_rusty_racer]

After tearing the bike down, we found some interesting things. The fuel cap is hard-stuck, and the key won't turn. Shockingly, we were able to get the bike to start with the stale gas in the tank and just a jump pack on the battery. It didn't run well, but it did run. After that, we discovered that the battery is the original lithium battery from 2009, when we took it out, we discovered it was really puffed up and definitely a fire hazard. Didn't get any pics of that, but a keyless gas cap and new lithium battery are already on order. from there. We got the tank and airbox off. The first thing to look at was the air filter. It has the DP filter that came with the exhaust, but it has a small hole in it. So a set of MWR pod filters got ordered.



Next, the fuel pump, and holy crap, it was gross.



After an initial clean it looks a lot better but still has a ways to go. safe to say a new fuel filter is on order.


We also inspected the belts, and according to the part number, we estimate they were last replaced in 2015. yikes.

With that knowledge, we assumed it was worth it to fire up the parts cannon and sent it on basically all the wear items.

 

[The_rusty_racer]

Since this bike is gonna live on track, we wanted to see how big a tire we could fit on. My goal is to fit a 200/65 on. I believe the only way to do that is with the Pierobon swingarm mod. I had a 190/60 Pirelli slick in my storage locker, so my buddy took that and then sent me this pic of the tire on 1198. It already looks so much racier!



Unfortunately, the tire rubs on the weld even with the "little" 190. My buddy says there is a mod you can do to move the brake pivot and rotate the eccentric further back. That should give us enough room to fit the 190 with tire warmers. That will be a must, and we'll probably grind down the weld to get a little more clearance. With both of those, I'm hoping we can fit at least a 200/60, but time will tell.

I didn't take any before photos, but here you can also see I've started cleaning up the exhaust with a scotch brite pad. It's looking a little less ratty; however, it still has a really long way to go.

We also discovered a big crack in the left side of the undertray (not pictured). I got this pic saying he's ordering us a carbon one. This is also a good angle to see that everything under the fairings is still super gross after our initial clean. This bike is gonna need a lot of love.

 

[The_rusty_racer]

A lot more progress. I found a Speedy Moto front axle slider in my spare parts bin that I think it was actually for this bike, cause it fits perfectly.



The calipers came off, and my friend deep-cleaned them. He says he can do better, but I'm impressed. To my eye, they look brand new.



While he was doing that, I cleaned up the OEM caliper bolts and drilled them for safety wire. Not perfect, but miles better.



This was just in time for parts to start showing up



The bike also came with a set of Genuine Pazzo levers, which are nice, but they are in gold, which is just not my colour. Pazzo sponsors my racing, so I had a spare lever kicking around. So obviously it was out with the old gold and back with the black

In the background, you can see the JB weld on the front fairing stay. Don't worry, that's just a placeholder for fitting bodywork. Eventually, it'll get a lightweight MotoHolders fairing stay.



Also installed a second-hand STM slave cylinder. I would have preferred black, but after seeing it in person, it's not so bad. By no means was this a necessary mod, but the price was right. You can also see here that we pulled off the rusty chain to get in and clean the engine a bit better. The bike is gonna look good with the new chain and superlite sprockets!



At the same time we did this, we also swapped the clutch reservoir to the dark smoke Brembo reservoir and replaced the ratty old tubing with some fresh clear Tygon. We also started to dig into the engine. You can also peep the new battery.



The tiny new BS lithium in its new foil-wrapped the home. The idea is to keep the heat out and hopefully extend the life of the battery, not sure how effective it'll be but see. The BS is so small that we used all the foam in the package, yet still, the battery moves around. I've ordered more foam from Amazon, so eventually it will be secure.

In the back of my mind, I'm wondering about making a dedicated aluminum or 3d printed battery box that's sized specifically for the BS. The main benefit there would be less stuff around the horizontal cylinder and, therefore, improving air flow past the rear cylinder. Probably not worth the effort, but could be a cool project.



With the cam covers off, we could do the valve inspection. This confirmed that it's waaaay overdue for a desmo service, with 7 of the 16 shims out of spec.




At this point, we also busted out the borescope to check the cylinders; they looked imperfect but good enough for a bike with 25,000 km on it. We've elected to leave the heads on and not do a full rebuild. We'll save that for next winter.



The clutch has more evidence to show just how badly it's been neglected. New plates and basket are already on the way, along with new bearings. I'm not doing a slipper clutch yet, but I'm sure that'll happen eventually. Maybe when we do the full engine rebuild.



We also discovered that someone had already done the kickstand bypass. So that's one more thing off my list for track readiness.



One of the downsides of having someone who works at a dealer is that he finds crazy stuff. My friend came downstairs from the parts loft with a carbon fiber clutch reservoir bracket. To me, as a racer, this is the epitome of silly, unnecessary carbon fiber for the sake of it. This saves maybe 5g and will have zero impact on lap time. But it's so ridiculous it might be finding its way on the duc haha.



I think that's all the major stuff we've done over the last month since I got the bike. Hopefully, I'll be updating this thread a lot more soon.

 

[The_rusty_racer]

In the last post, I forgot to mention the last attachment. One of the things the bike needs to be race-ready is a shark fin. All the ones that I can find seem to be carbon fiber, which is nice, but a little more money than I want to spend.

I found THIS DIY option, it’s a decent base, but I wasn’t a fan of the design visually.

So I designed a quick one that will mount into the bottom of the swingarm the same way. I have some scrap Aluminum lying around, and a friend has offered to cut it on their CNC at work for a case of beer. I think I'm gonna be the direction I go unless I can source a carbon one on the cheap.

 

[BMW Alpina]

Wow, this is a great technical track build. Can't wait to see more updates from you. I also just bought that STM Clutch Slave Cylinder in the same Red color, because they came in 28mm, while the Oberon that I previously had was 29mm. My STM evoluzione SBK clutch was not releasing with 29mm Oberon... but even with the 28mm, it still stuck. Maybe I need to reopen my STM clutch to see if I stacked them wrong...